Installation; Tools Required; Screwing The Injector Nozzle Onto The Module - Miele professional A 620 Instrucciones De Manejo

en - Installation
Screwing the in-
jector nozzle onto
the module
46

Tools required:

– 9 mm Spanner (WAF 9)

Installation

Lift up the support on the injector nozzle and screw the injector

nozzles into the required position .
Use the spanner to tighten the injector nozzle .

Slide the support on the injector nozzle downwards until it rests on

the water supply pipe .
Screw the other injector nozzles into the required positions.