Ecler NUO5 Manual De Instrucciones página 12

The ETERNAL inductive crossfader has been designed mainly to perform extreme "turntablism" techniques, where
potentiometer movement has to be extremely smooth and fast.
In case the user prefers a more standard type of crossfader, the NUO5 comes with a separate long life VCA
crossfader. To exchange the crossfader, remove the fader area front plate, unplug the ETERNAL crossfader and
replace it with the separate long life VCA crossfader. Both potentiometers use the same plug configuration and the
ETERNAL REVERSE (15) and SHAPE (16/17) controls. The CUT-IN-TIME knob is not adjustable anymore (Fixed
cut-in-time) and the XF OFF (18) position is disabled with the long life VCA crossfader. We recommend to place the
CUT-IN-TIME knob at its maximum position (turned right) while using the long life VCA crossfader.
5.2.8 Internal effect controls
Please refer to next chapter 6 EFFECT PERFORMANCE.
5.2.9. TALKOVER function
The Microphone channel 5 features a TALKOVER Function. The red led push button activates (switch ON) the
TALKOVER and the PGM signal will be attenuated –30dB by the Microphone input (the Talkover time is set-up at 1
seconds). TALKOVER disables the channel 5 FX SEND function.
5.2.10 MASTER Levels
The NUO5 features two main output level controls MASTER 1 (35) and MASTER 2 (36). The OUT 1 (48/49) level is
controlled by the MASTER 1 level knob and is monitorized with the central and right Vu-meter bars (38). The
OUT 2 (50) level is controlled by the MASTER 2 level knob.
MASTER 1 and MASTER 2 are affected by R+L button. MASTER 1 is affected by the BAL balance control knob.
12