Digital Connections - Ecler NUO5 Manual De Instrucciones

3.3 Digital connections

- USB Port:
A USB Type B connector (51) is located in the back of the mixer. The USB Port allows you to remotely edit and
control the internal effect programs through the edi:lab software (see Install CD-Rom). The USB Port connection
procedure and edi:lab software use are described in chapter 7. PC MODE – EFFECT REMOTE PARAMETERING.
- MIDI Out:
The DIN 5 (180º) MIDI OUT connector (55) allows you to control external devices using MIDI protocol. MIDI is a
standard protocol for communication between electronic musical instruments and computers. The MIDI connection
procedure is described in chapter 8. MIDI USAGE.
8