Sony CDX-R5810 Manual De Instrucciones página 7

G DSO button 2
To select the DSO mode (1, 2, 3 or off). The
larger the number, the more enhanced the
effect.
H OFF button
To power off/stop the source.
I SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
J
(front panel release) button 4
K SOURCE button
To power on/change the source (Radio/CD/
1 2
MD* /AUX* ).
L MODE button 8, 12
To select the radio band (FM/AM)/select the
unit* 3 .
M RESET button (located behind the front
panel) 4
N Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD* 1 :
(1): REP 8
(2): SHUF 8
(5): BBE MP*
4 2
To activate the BBE MP function, to set
"BBE MP-on" during playback on this unit.
To cancel, set "BBE MP-off."
O Frequency select switch (located on
the bottom of the unit)
See "Frequency Select switch" in the
supplied installation/connections manual.
P DSPL (display) button 8, 10
To change display items.
Q GP*
5 /PRESET –/+ buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
R Receptor for the card remote
commander
S Disc slot 5
To insert the disc.
T Z (eject) button 5
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa MENU button
To enter menu.
ws ENTER button
To complete a setting.
wd < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit.
wf LIST button 9, 12
To list up.
wg M (+)/m (–) buttons
To control radio/CD, the same as
(GP/PRESET) –/+ on the unit.
*1 When an MD changer is connected.
*2 When an optional Sony portable device is
connected.
*3 When a CD/MD changer is connected.
*4 The unit only.
*5 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 12.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
7