Publicidad
8 von 21
Maskinen monteres på sokkel
Den udstansede pil (2) på soklens overside peger mod fronten, se ill. 2.
A
Anbring maskinen på soklen, og juster den ved hjælp af de indstillelige ben.
A
Afmonter maskinens front og bagvæg.
A
Monter maskinen på soklen med 4 beslag (1) med hver 2 sekskantskruer M6x25 (2), 4 skiver B6,4 (3) og 2 møtrikker
M6 (4), se ill. 3.
A
Monter maskinens front og bagvæg.
A
Lukket sokkel: Monter panelerne iht. den vedlagte monteringsbeskrivelse.
da
en-US
Stand UO4xx, UO8xx
Parts included
Quantity Mat. no.
Designation
1
Stand
16
B6.4 galvanized washer
8
M6x25 bolt
8
M6 nut
4
S12 plug
4
8x80 wood screw
30
Spacer
4
38x4 washer
4
Bracket
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety regulations must be taken into account.
A
Read the technical service documentation (TSD) before starting service work.
Risk of cuts
CAUTION
Components are sharp.
Risk of cuts.
A
Protective gloves should be worn and the edge protection, mat. no. 05057680, should be used.
17.01.2018
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 10222060
Publicidad
