Mounting The Wheels - Ecler DPC7000 D Manual De Instrucciones

The enclosure will acquire
different tilt as a function of the
chosen link. Following table shows
the tilt angles for
enclosure. It the tilt angle is not steep
enough, tilt it further by using the
bottom rails.
In case two rows are utilized,
we recommend tilting the assembly
from the bottom track.
Each position
aeronautic specified cargo restraint
track has a maximum load capacity of
180kg, considering the enclosure is
correctly flown, as shown in the
diagrams.
The tracking system works in
combination with Ecler ADP cargo
restraint double stud and ring. (Adam
Hall Ref. 5740).
The total load capacity of the
structure (track + ring) is limited by
this track and is 180kg per anchor point. (360kg total).
Always make sure that the anchor points are firmly attached to the rail and locked.

3.3. Mounting the wheels

In case the system is to be used
for mobile applications, we recommend
the QRA and WH200 accessories.
The QRA consists of four fittings,
which once attached to the cabinet in the
appropriate locations, allow the quick
assembly and disassembly of the castor
wheels, thus avoiding annoying vibrations
during sound reproduction.
The WH200 is a four-piece castor
wheel set, suitable for the QRA.
8
one single
of the
8 = -12º
7 = -10º
6 = -7,5º
5 = -5º
4 = -2,5º
3 = 0º
2 = +2,5º
1 = +5º
1 = +5º
8 = -12º