Miele professional A 201 Instrucciones De Manejo página 42

en - Areas of application
42
Bellows
If bellows are to be processed, one of the E 466 injector nozzles must
be replaced with a special E 431 injector nozzle for bellows which has
a larger support ring.
To do this:
Use a 7 mm spanner to unscrew one of the E 466 injector nozzles.

Then screw the E 431 injector nozzle into the vacated position and

tighten with the spanner.
Fit the bellows onto the E 431 injector nozzle.
