Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate the beginnings of tracks on the
tape. Rotate and hold the control, then
release into fast-wind the tape.
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to tune in a specific
station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorised on the
number buttons.
•Change the disc.

Other operations

Rotate the VOL control to
adjust the volume.
Press (SOUND) to adjust the
volume and sound menu.
Press (FILE) to:
• Display the memorised names.
• Display the programme type.
Changing the operative direction
The operative direction of controls is factory-
set as in the illustration below.
To increase
To decrease
If you need to mount the rotary commander on
the right side of the steering column, you can
reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Tip
You can control the operative direction of controls
with the unit (page 20).
Press (ATT) to
attenuate the
sound.
Press (OFF) to
turn off the
unit.
EN
19

Publicidad

Tabla de contenido
loading

Tabla de contenido