Installing The Battery; Removing The Battery - ENERGY SISTEM SportCamPlay Manual De Usuario

REmOvINg THE SD CARD
1. Turn off the camcorder.
2. Open the SD card and connectors cover.
3. Push the SD card to eject it from the slot.

INSTAllINg THE bATTERY

Warning: Use only the supplied battery or a similar battery recommended by the manufacturer or the dealer.
1. Push down the battery compartment cover to open it.
2. Align the battery contacts and then insert the battery into the compartment with the ribbon underneath the
battery.
3. Close the battery compartment cover.

REmOvINg THE bATTERY

1. Open the battery compartment cover.
2. Pull the ribbon to remove the battery.
35