Safety Instructions - Flex ALC 8 Instrucciones De Funcionamiento Originales

Safety instructions

WARNING!
Do not point the laser beam at people or
–
animals and do not look into the laser beam.
This measuring instrument generates laser
radiation which may cause blindness.
Have the measuring instrument repaired by
–
qualified technicians and with original spare
parts only. This ensures that the safety of
the measuring instrument is maintained.
Do not let children use the measuring
–
instrument unsupervised.
They could accidentally blind people.
Do not use the measuring instrument in
–
a potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
If devices other than the operating and
–
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure
to radiation.
Do not disable any safety devices and
–
do not remove any information or warning
signs.
Before switching on the device, check for
–
visible damage. Do not switch on damaged
devices.
When using the measuring instrument on
–
ladders, avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
CAUTION!
Do not use the device in the rain.
–
If the device is brought from a very cold
–
to a warmer environment or vice versa,
you should allow the device to acclimatise
before using it.
If using adapters and tripods, ensure that
–
the device is screwed on tightly.
FLEX ALC 8
11