Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Close the release and Fast-slow Valve valve by
turning it clockwise until it is firmly closed.
6. Pump the handle or pedal until serrated saddle
nears workpiece. Then, open Fast-slow Valve by
turning it counterclockwise.
7. Keep ram and work piece aligned to ensure
center-loading.
NOTE: Stabilize work piece in a manner which
will not allow it to inadvertently fall from the bed
framewhen the load is removed.
8. Align ram and workpiece to ensure center-loading,
pump the handle or pedal. Do not overload
workpiece.
9. When work is completed, stop pumping the
handle. Slowly turn the release valve counter-
clockwise in small increments until ram is free
from work piece.
10. Once ram has fully retracted, remove work piece
from bed frame. Cautiously remove work piece
from press.
12
Publicidad
Tabla de contenido
