Medisana MTR Instrucciones De Manejo página 30

3 Getting started
GB
3.6
Adjusting the
voice function
22
If you have deactivated the alarm, you will now return to the display
of time and date. Is the alarm activated, you can now enter the
hour and minute of the alarm time by using the button "+/A"
resp. "-/B" and SET button
&
of the minutes and pressing SET button
display of time and date. With the Set volume button
adjust the volume of the alarm. Upon reaching the alarm time, the
alarm will beep for 1 minute. Press any button to end the alarm.
NOTE
If you want to leave the alarm adjustment mode, press
START button
after approx. 1 minute without any inputs.
The blood pressure monitor with radio MTR is equipped with a voice
function, which can announce the date and time during its display.
Press ENTER button
blood pressure measurement results can be announced with this
voice function, please see chapter "Measuring the blood pressure".
The voice function can be adjusted in 7 different languages. For
selecting a language (resp. for deactivating the voice function) press
SET button
and select the voice symbol
=
with the buttons "+/A"
to confirm. You may now choose between these voice options:
L0 = Deactivate voice function
L1 = Activate voice function, Language: German
L2 = Activate voice function, Language: English
L3 = Activate voice function, Language: Spanish
L4 = Activate voice function, Language: Dutch
L5 = Activate voice function, Language: French
L6 = Activate voice function, Language: Italian
L7 = Activate voice function, Language: Portuguese
Select the desired option with the buttons "+/A"
press SET button
=
spoken announcement of the selected language. If the voice function
has been deactivated (L0 is shown in display) three beeps can be
heard and the voice symbol
volume of the spoken words at any time with the set volume button
NOTE
If you want to leave the voice adjustment mode, press
START button
after approx. 1 minute without any inputs.
to confirm. After the adjustment
=
. The unit automatically leaves the mode
(
to activate this function. Furthermore,
§
resp. "-/B" and press SET button
% &
to confirm. For the options L1 to L7 there is a
will extinguish. You may adjust the
R
. The unit automatically leaves the mode
(
you will return to the
=
you can
+
(the symbol flashes)
R
resp. "-/B"
% &
%
=
and
.
+