Sample Deck Control; Remix Layer Control - Reloop Jockey 3 Remix Manual De Instrucciones

nO FUnCTIOn
T44 Crossfader
Via this fader it is possible to fade between the decks.
F48 Crossfader Curve
Herewith it is possible to adjust the crossfader's curve. Long > Cut.

4.1.2 Sample deck Control

NOTE! If sample mode is activated by pressing the button -T18- on the track deck layer (Deck A/B), all functions with blue background captions
will be applied to the sample deck without using the deck Switches -T31-. The exact function description can be viewed in the following chart.
nO FUnCTIOn
T2-T3 Slot Filter dial
Controls the filter assigned to the slot. By pressing the filter will be set back and
deactivated.
T4 - T7 Slot Select
If a slot is active, it is possible to simultaneously control the functions via -T9-
and -T23-.
T9 Master Filter dial
Controls the slot filters of the respective active slots -T4 – T7-.
T14 Slot Start/Mute
-T17 Activates the slot for playback. Please consider that the deck has to be started
first -T29-. When the slot is active and the the button is being pressed again, it
switches to mute mode. By pressing once more, you exit mute mode. If a slot
is empty, a sample from the assigned deck will be loaded; coresponding to the
deck's set loop length.
T20 Slot Trigger
Jumpos to the beginning of a sample and starts playback based on the quanti-
sation length assigned to the deck. If a slot is empty, a sample from the assigned
deck will be loaded; corresponding to the deck's set loop length.
T23 Slot Scratch
Activates scratch mode for the respective active slots -T4 – T7-.
T30 Sample Load
Loads a sample from the track collection in the next free slot.
T27
T28
T29

4.1.3 Remix Layer Control

NOTE! If remix mode is activated by pressing the button -T19- on track deck layer (Deck A/B), all functions with green background captions for
efect control will be activated . The exact function description can be viewed in the following chart.
nO FUnCTIOn
T1 Stutter effect
By moving the pitch fader a gater effect will automatically be selected and
activated on the respective deck.
T4 Freeze effect
By pressing the encoder, a freeze effect will be carried out on the respective
deck. By pressing again, the freeze effect will be deactivated. By turning, the
freeze length can be adjusted.
T5 Macro effect
By holding and turning, an effect chain (delay/reverb/filter) will be carried out.
T18 Beatmasher
When mash mode is active, the hot cue pads will also be switched to mash mode.
Each pad corresponds a certain length of the beatmasher. Additionally this mode
can also be used without switching to remix mode.
T19 Beatjumper
By pressing the mash buttons, a new cue point will be set. It is possible to jump
on in steps of 1. The hot cue pads receive the following sub-division: Pad 1: +0, Pad
2: +1, Pad 3: +2, Pad 4: +3. Additionally this mode can also be activated without
switching to remix mode.
T24 Jog Fx
By holding and turning, an effect chain (LoFi, Delay, Filter92LFO) will be carried
out.
T35 Crusher
By moving the linefader, a LoFi effect will be automatically selected and asigned
to the corresponding deck.
FUnCTIOn WITH ACTIvATed SHIFT -T23-
FUnCTIOn WITH ACTIvATed SHIFT -T23-
Slot volume dial
Controls the slot specific volume. By pressing, the volume will be set back to
100%.
Master volume dial
Controls the slot volume of the respective active slots -T4 – T7-.
Slot Stop/Delete
Stops a slot which is currently in playback mode. By pressing again the sample
will be deleted from the slot. If the slit is empty, the selected sample can be
loaded from the tracklist by pressing.
Sample Delete/Load
Deletes a slot whether it is active or not. By pressing again the selected sample
from the tracklist will be loaded.
Key Lock
Activates key lock function for the respective slot -T4 – T7-.
Fx On
Activates the FX section for the respective slot -T4 – T7-.
Cue Monitor
Activates monitoring function for the respective slot -T4 – T7-.
FUnCTIOn WITH ACTIvATed SHIFT -T23-
27