Wall Track Installation - OVE ELLIS 60 Manual De Montaje

1-2. Ensure the base and shower frame are leveled. Mark the position of the holes of the wall tracks (E) on the
wall.
3. Remove the shower frame.
4-5. Drill pilot holes in the marked locations with a ø1/4" (6mm) drill bit. Insert the wall anchors (AA) using a
rubber mallet until the wall anchors are flush with the wall.
6. Replace the whole shower frame onto the base.
1
B
3
5
AA

WALL TRACK INSTALLATION

E
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
13
2
E
4
ø1/4"
6 mm
6