Door Installation - Klarstein 10032903 Manual De Instrucciones

EN
22
5 Slide the hinged door frames to the edge so that the outer edges of the door frame
are level with the outer edges of the cabinets.
6 Mark the positions where you install the lower screws. Drill the upper hole and fix
the screws. Make sure all four screws are tightened securely.
7 Mount the air-outlet board and the air outlet tube (vent hose) which must be
led outwards. Fixed kits are available on request from DIY stores and builders
merchants.

Door installation

1 The door must be at least 16 mm thick, 385-700 mm high and weighing a
maximum of 7 kg. Pull out the movable fan-shaped door frames on the plastic
handle and insert them on the left and right.