6. Profile
You can select ring tone or vibration for an incoming call and
configure the sound and volume of the ring tone, button sound, folder
sound, sound effect, and power on and off sound according to a
profile. The profiles provided include [Vibrate only], [Silent], [General],
[Outdoor], [Headset], [Car], [User define1], and [User define2]. Select
a profile, and press the OK button to activate the profile. The
[General], [Silent], [Vibrate only], [Headset], and [Car] profiles do not
have an Option menu. Move the cursor to the corresponding profile.
Then menus available are displayed on the softbar below the screen.
Select the View or Edit menu for each profile to view the configuration
of the item or to change the configuration.
Alert by
This option determines the incoming call notification mode. You can
select from [Ring], [Vibration], [Ring & Vibrate], [Ring after vibration],
[Ring once], and [Beep once] mode.
Voice ring tone Line 1/2
This option determines the Voice ring tone for incoming call
notification.
VT ringtone
This option determines the Video ringtone for incoming call
notification.
Ring tone volume
This option determines the ring tone volume for incoming call
notification.
Message alert
This option determines the message alert that is sounded when a
message has been arrived. You can select one of [No sound],
[Once], [Every 1 min], [Every 2 min], [Every 5 min], and [Every 10
min] mode.
86
U8150 User Guide