Publicidad
separate parts. Undo the button and lower a flap
for easy inspection.
13 HANDLE BAR: the handle bar is locked only if in
the vertical position (fig_a). To lower it, press the
two side buttons simultaneously and rotate it
downwards (fig_b).
14 The handle is useful for carrying and fastening
the Z4 Bassinet onto the chassis (fig_a). To lift
the bassinet, use the grip area on the handle bar
(fig_b).
15 ADJUSTING THE BACKREST: thanks to the
COMFORT SYSTEM the backrest can be adjusted
in 3 positions by pulling and fastening the
adjustment belt in the desired position, as shown
in the picture
16 ALL SEASONS SYSTEM: this system allows to
adjust internal air circulation in order to prevent
condensation. To adjust as required, lift the
seat (fig_a) and extract the air circulation panel
(fig_b).
17 Rotate the air circulation panel (fig_a) so that
the openings overlap (or cover) the openings
on the bottom of the bassinet. If they match, air
flows through. Lastly, slide the panel into the seat
(fig_b).
T-MATIC SYSTEM
18 The T-Matic System is the quick, practical system
that allows you to attach the Z4 Bassinet onto
the Z4 Chassis, using the T-MATIC fastenings.
19 To unfasten the Z4 Bassinet, pull out the tab on
the back (fig_a) and lift (fig_b).
Removing the soft cover
20 Remove the foot muff by opening the zip that
keeps it fastened to the bassinet's padding.
21 Remove the mattress and take off the mattress
case.
22 Open the zip that keeps the hood fastened to
the bassinet's padding (fig_a). Next, press the
two buttons on the sides of the handle bar and
remove the hood (fig_b).
23 Remove the padding by opening the zips that
keep it fastened to the bassinet frame.
24 Remove the belt that adjusts the backrest in the
various positions.
25 Lift the backrest (fig_a), then pull out the
mattress until you access the two eyelets in
which the ends of the belt are inserted (fig_b).
Slip them out (fig_c).
26 Remove the belt (fig_a) and then extract the
mattress from the backrest (fig_b).
Folding
27 Remove the foot muff, the hood, the mattress
and the internal lining. Lift the backrest (fig_a),
unfasten the metal rod and rotate it upwards
(fig_b). Lower the backrest and then the metal
rod.
28 Lift the seat (fig_a) and, using the latch, release
the metal rod (fig_b) and fold it (fig_c). Lastly,
lower the seat so that the Z4 Bassinet folds.
Serial numbers
29• Information about the production date of Z4
14
Publicidad
