Sedus black dot Instrucciones De Uso página 8

The functions of the swivel chair
A
Height of the seat
Lowering the seat:
P
1. Sit down on the seat
2. Pull the lever upwards
(the seat will drop slowly)
3. Releasing the lever at the
desired height will lock
the position
Raising the seat:
P
1. Stand up
2. Pull the lever upwards
(the seat will rise slowly)
3. Releasing the lever at
the desired height will
lock the position
B
Angle of the backrest
Adjusting the
P
backrest dynamically:
1. Pull the lever upwards
and release it
2. Lean against the backrest
3. The backrest is automatically
released
Locking the backrest
P
into position:
1. Lean back until the backrest
reaches the desired angle
2. Press the lever down and
release it to lock the backrest
into position
8 English
C
Height of the lumbar support
(optional)
Adjusting the height:
P
1. Do not lean against the backrest
Sliding lumbar adjustment
2.
Lumbar depth
P
(optional on black dot net):
Turn inlay to increase or
decrease support
D
Strength of the backrest pressure
Increasing the backrest pressure:
P
1. Pull out the handle
2. Crank the handle clockwise
(forwards)
3. Push the handle back in
Reducing the backrest pressure:
P
1. Pull out the handle
2. Crank the handle anticlockwise
(backwards)
3. Push the handle back in
E
Adjusting the seat tilt (optional)
To tilt the seat forwards:
P
1. Take your weight off the seat
2. Pull the lever out, hold it and
swivel it anticlockwise until
the seat is tilted to the angle
you require. Then release the
lever = lock in position
To return the seat to horizontal:
P
1. Take your weight off the seat
2. Pull the lever out, hold it and
swivel it clockwise; the seat will
return to its normal horizontal
position
I
B
E
J
C