Emptying The Appliance; Troubleshooting - CASO DESIGN Cafe Crema One Manual De Instrucciones

Do not leave the device unattended, as the device may switch off if you do not follow
these steps promptly: Remove all the remains of the descaling agent from the water tank
and thoroughly rinse it. Empty the collecting vessel and place it under the coffee outlet
and the steam nozzle again. Fill the water tank once more up to the Max mark. Insert the
water tank into the appliance. Caution: the device immediately continues the descaling
and cleaning process and stops flashing. The device automatically switches itself
off once the process has been completed. Empty the collecting vessel and thoughly rinse
the water tank once more.
The device can then be operated as usual.
Please note
► Never interrupt the descaling process.
► The guarantee excludes devices which have stopped working or do not work properly
due to lack of descaling.

14.7 Emptying the appliance

A device that is not used for a long time, stored or sent to our customer service for repair
must be completely emptied.
Press and the coffee button together for approx. 5 seconds. The LED
flashes.
Remove the water tank
The LED now flashes constantly. The device is emptied and then switches itself off.
Pull the mains plug. Store the device at a dry location.
If you want to put the device back into operation, then proceed as described under "Before
first use".

15 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Attention
Only qualified electricians, who have been trained by the manufacturer, may carry out any
repairs on electrical equipment.
Improperly performed repairs can cause considerable dangers for the user and damages
to the device.
55