Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensions
(all dimensions in mm)
Important: The spray gun must be earthed to dissipate any electrostatic
charges which may be created by fluid or air flows. This can be achieved
through the spray gun mounting, or conductive air/fluid hoses. Electrical
bond from the spray gun to earth should be checked with an Ohm meter.
6
A resistance of less than 10
Ohms is recommended
© 2013 Finishing Brands UK Ltd.
8
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
