Refrigerator Use; Ensuring Proper Air Circulation; Using The Controls - Sears Galaxy 2305803 Manual De Uso Y Cuidado

Refrigerador de dos puertas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Contraction and expansion oftheinside walls may cause a
popping n oise.
You may hear a irbeing forced over t hecondenser bythe
condenser fan.
• You may hear w ater r unning intothedrain panduring t he
defrost cycle.
REFRIGERATOR USE
Ensuring Proper Air Circulation
In order to ensure proper temperatures,
you need to permit air to
flow between the two sections. Cold air enters the bottom of the
freezer section and moves up. It then enters the refrigerator
section through the top vent. Air then returns to the freezer as
shown.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the "mid-settings"
as shown.
Rotary Controls
FREEZER
REFRIGERATOR
m
I
2
3
.
3
4 .
COLD
COLDER
I_U)
1
8
COLDER
Slide Controls
Freezer
Re|rigeratet
Do not block any of these vents with food such as soda, cereal,
bread, etc. If the vents are blocked, airflow will be prevented and
the temperature
controls will net function properly.
IMPORTANT:
Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer from food, wrap or cover foods tightly.
Using the Controls
Your model may have Rotary Controls or Slide Controls.
IMPORTANT:
Your refrigerator will not ceel when the Refrigerator Control is
set to OFK
The Refrigerator Control adjusts the refrigerator compartment
temperature.
The Freezer Control adjusts the freezer
compartment
temperature.
Higher numbered settings make
the compartment
colder. Lower numbered settings make the
temperature
less cold.
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
higher (colde¢} setting will not cool the compartments
any
faster.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
cold
1
2
-
3
4 colder
off
1
2
A
3
4
colder
AdjuslJng Controls
NOTE: Wait at least 24 hours between adjuetrnents and then
recheck the temperatures.
If you need to adjust temperatures,
adjust the refrigerator
temperature first.
Rotary Controls
Turn the control right (clockwise) to make the cor'npartr'nect
colder. Turn the control left (counterclockwise)
to make it less
cold.
Slide Controls
Slide the control one setting to the right to make the
compartment
colder. Slide the control one setting to the left to
make it less cold.
CONDITION/REASON:
SETTING
ADJUSTMENT:
REFRIGERATOR tee cold
REFRIGERATOR
- Not set correctly for your
Control one setting
conditions
lower
REFRIGERATOR tee warm
REFRIGERATOR
- Boor opened often, large amount
Control one setting
of food added or room temperature
higher
very warm
FREEZER toe cold
FREEZER Control one
- Not set correctly for your
setting lower
conditions
FREEZER tee warm/toe
little ice
FREEZER Control one
- Boor opened often, or large
setting higher
amount of food added or very cold
room temperature
(can't cycle often
enough) or heavy ice usage
lO

Publicidad

Tabla de contenido
loading

Tabla de contenido