Assembly - Delta JT160 Manual De Instrucciones

For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
ASSEMBLY TOOLS REQUIRED
* Two hex wrenches (supplied)
ASSEMBLY TIME ESTIMATE - 30 minutes
FENCE
1. Assemble the fence mounting bracket (A) Fig. 5 to the jointer base using the four M6x1x16mm button head screws
(B) Fig. 6.
2. Assemble the fence sliding bracket (C) Fig. 7 to mounting bracket (A) using the lockhandle (D), M8 flat washer (E)
and special nut (F) Fig. 8.
C

ASSEMBLY

A
Fig. 5
D
E
A
Fig. 7
B
9
B
Fig. 6
F
Fig. 8