Technical Specifications; Safety Notes - brennenstuhl ML CA110 M DE 4113 Manual De Instrucciones

Rechargeable LED work lamp
D
ML CA 110 M DE 4113/ML CA 120 M CH 4113
ML CA 120 M DE 4113/ML CA 120 M FR 4113

TECHNICAL SPECIFICATIONS:

Type description
Output:
Rechargeable batteries:
Operating time:
Charging time:
USB outlet:
Protection class:
Protection class:
Temperature range:
Type description
Output:
Rechargeable batteries:
Operating time:
Charging time:
USB outlet:
Protection class:
Protection class:
Temperature range:

SAFETY NOTES:

• Please read the operating instructions carefully prior to use and do not throw them away.
• Prior to every use, check the lamp and power adapter for damage.
Never use the lamp or power adapter if there is any damage.
In this case, please contact an electrician or write to the service address provided by
the manufacturer.
Non-compliance may result in risk to life due to electrical shock!
• Never open the device. The lamp does not contain any components that require maintenance.
The LEDs cannot be replaced.
• Do not use the work lamp in explosive environments in which flammable liquids,
gases or dusts are present. Risk to life!
• The lamp is protected against spray water.
Never immerse the lamp in water or other liquids.
Risk of explosion and fire!
17P150_Akku_LED_Arbeitsstrahler_0496136_KW1219.indd 5
ML CA 110 M DE 4113
10 W
Li-Ion 3.7 V, 4400 mAh (cannot be replaced)
approx. 3 h (100 %) or 6 h (50 %)
depends on power supply unit, approx. 4.75 hours,
at max. charging current 1A
5 V, max. 1 A
IP 54 (onlt if the transparent cover is closed)
III
-10 °C – +40 °C
ML CA 120 M DE 4113 / ML CA 120 M FR 4113 / ML CA 120 M CH 4113
20 W
Li-Ion 7.4 V, 4400 mAh (cannot be replaced)
approx. 3 h (100 %) or 6 h (50 %)
depends on power supply unit, approx. 5 hours,
at max. charging current 2 A
5 V, max. 1 A
IP 54 (onlt if the transparent cover is closed)
III
-10 °C – +40 °C
5
16.03.19 13:12