Technical Data; Maintenance And Cleaning - brennenstuhl ML 130 IP54 Instrucciones De Utilización Y De Seguridad

Mobile LED-light
(ML 130 IP54, ML 2705 IP44, ML 3001 IP65)

Technical data

Output, supply voltage and safety class:
see identification plate
Only for model ML 2705 IP44:
Voltage: 220 - 240 V ~ 50 / 60 Hz
Wattage: 27 x 0,5 W LED
Weatherproof: IP44
Protection: Class I
Cabel: H05RN-F 3G1,0
This luminaire is only intended for normal use, must
not be used for rough service.
Scope of delivery
The LED floodlight with carrier is delivered ready to
plug in with cable and polarised plug.
Note: The LED floodlight with carrier can be ad-
justed continuously within the swivelling range.
Safety notes
This light may not be operated
unless all sealing rings are located properly!
LED-lights are extremely bright. Under no cir-
cumstances look into the light beam of the LED
lights, as this may cause permanent damage to
your eyes.
FIRE HAZARD! Fit the light so that it
is at least 1 m away from the material
1 m
to be illuminated. Excessive heat can
result in a fire.
If the glass is broken, it has to be
replaced with a new original Brennen-
stuhl protective glass before further use.
RISK OF INJURY FROM BURNS! Ensure the
light has been switched off and allowed to
cool before you touch it.
LED-Strahler mit Gestell_Content_ML130-2705–3001_EU_052014.indd 5
To prevent hazards, a damaged flexible outer
lead of this light may only be exchanged by
the manufacturer, his service representative or
by an equally qualified specialist.
Note: Please ensure that the LED floodlight
stands safely and on a firm surface. Please en-
sure that the cable is not getting squashed or
otherwise damaged.

Maintenance and Cleaning

Note: The LED spotlight does not contain any service-
able components. The LEDs cannot be exchanged.
Please do not use solvents, acidic cleaners etc.
Please only use a dry or damp cloth for cleaning.
Disposal
Dispose of electrical goods in an environ-
mentally friendly way!
Do not dispose of electrical equip-
ment in the household waste!
In accordance with European Directive 2012 / 19 / EU
relating to old electrical and electronic appliances,
used electrical equipment must be collected separately
and recycled in an ecologically compatible way.
Contact your local authorities for information on how
to dispose of the appliance at the end of product life.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · 72074 Tübingen · Germany
H. Brennenstuhl S.A.S.
F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
GB 5
17.06.14 14:56