Reminder; Important - Solera E-112 Manual De Uso Y Mantenimiento

D r i n k c o o l e r s

REMINDER

The Solera drink dispensers meet essential health and safety requirements for machines as set
forth in Council Directive 2006/42/EC, have the respective "Release Certificate", and are, therefore,
authorised to be marked "EC".
In Point 1.7.3, the Council Directive mentioned requires that:
"Each machine shall be legibly and indelibly labelled with at the least the
following indications:
- name and address of the manufacturer;
- the mark 'EC' which includes the year of manufacturer (see Appendix III);
- designation of the series and model;
- serial number, if it exists."
Before removing the protective panels housing the machine, it must be unplugged from the electric
mains. If the machine has been running, it is advisable to wait at least 20 minutes before removing
the panels to give the compressor's high pressure tube time to cool down.

IMPORTANT

THE MANUFACTURER shall not be held liable for any damage or injury due to incorrect handling of
the appliance.
THE MANUFACTURER declines all liability in the event of failure to comply with the
recommendations in this manual.
THE MANUFACTURER reserves the right to make any modifications as it sees fit without prior
notice.
- 6_EN-
U s e r ' s i n s t r u c t i o n s a n d m a i n t e n a n c e m a n u a l
SL310008810 Ed.00 - 11-2012