Important Safety Information - Emerson InSinkErator F-1000S Instrucciones De Instalación

IMPORTANT SAFETY INFORMATION

To reduce the risk associated with the ingestion of contaminants: Do not use with
water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
To reduce the risk associated with hazardous voltage due to an installer drilling
through existing electric wiring or water pipes in the area of installation: Do not
install near electric wiring or piping which may be in path of a drilling tool when
selecting the position to mount the system bracket.
To reduce the risk associated with property damage due to water leakage
or flooding:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Protect from freezing, remove filter cartridge when temperatures are expected to
drop below 40° F (4.4° C).
• Do not install systems in areas where ambient temperatures may go above
110° F (43.3° C).
• Do not install on hot water supply lines. The maximum operating water
temperature of this system is 100°F (37.8°C).
• Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a
plumbing professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer
conditions exist you must install a water hammer arrester. Contact a plumbing
professional if you are uncertain how to check for this condition.
• Where a backflow prevention device is installed on a water system, a device for
controlling pressure due to thermal expansion must be installed.
• Do not use a torch or other high temperature sources near system, cartridges,
plastic fittings or plastic plumbing.
• Do not install in direct sunlight or outdoors.
• Do not install near water pipes which will be in path of a drilling tool when
selecting the position to mount the bracket.
• Mount system in such a position as to prevent it from being struck by other
items used in the area of installation.
• Ensure that the location and fasteners will support the weight of the system
when installed and full of water.
• Ensure all tubing and fittings are secure and free of leaks.
• Do not install unit if collet is missing. Contact 800-558-5700 if collets are
missing from any fittings.
• Do not install using rigid piping. System intended for use with plastic water lines
(such as PEX tubing, PE tubing, PP tubing).
6
IN-HOME FULL SERVICE LIMITED WARRANTY
This warranty is provided by InSinkErator ® , a business unit of Emerson Electric Co., ("InSinkErator" or "Manufacturer" or
"we" or "our" or "us") to the original consumer owner of the InSinkErator product with which this warranty is provided (the
"InSinkErator Product"), and any subsequent owner of the residence in which the Product was originally installed ("Customer"
or "you" or "your").
InSinkErator warrants to Customer that your InSinkErator Product will be free from defects in materials and workmanship,
subject to the exclusions described below, for a period of 1 year (the "Warranty Period"), commencing on the later of: (a) the
date your InSinkErator Product is originally installed, (b) the date of purchase, or (c) the date of manufacture as identified by
your InSinkErator Product serial number. You will be required to show written documentation supporting (a) or (b). If you are
unable to provide documentation supporting either (a) or (b), the Warranty Period commencement date will be determined by
Manufacturer, in its sole and absolute discretion, based upon your InSinkErator Product serial number.
Permitted Uses
You may use your InSinkErator Product hot/cold water tank and filter system in combination with any genuine InSinkErator
Product instant hot water dispensers and component parts, and with any authentic Dornbracht hot or hot/cold water dispensers
and component parts (collectively, "Dornbracht Water Dispenser") which Dornbracht expressly states in writing is/are compatible
with such InSinkErator Product(s). Use of your InSinkErator Product with any other manufacturer's products or in any combination
other than as expressly stated above will void this warranty.
What is Covered
This warranty covers defects in materials or workmanship, subject to the exclusions below, in InSinkErator Products used
by a consumer Customer for residential use only, and includes all replacement parts and labor costs. YOUR SOLE AND
EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE
INSINKERATOR PRODUCT, PROVIDED, THAT IF WE DETERMINE IN OUR SOLE DISCRETION THAT NEITHER REMEDY
IS PRACTICABLE, WE MAY PROVIDE YOU WITH A REFUND OF YOUR PURCHASE PRICE OR A CREDIT TOWARDS
ANOTHER INSINKERATOR PRODUCT.
What is not Covered
This limited warranty does not extend to and expressly excludes:
• Losses or damages or the inability to operate your InSinkErator Product resulting from conditions beyond the
Manufacturer's control including, without limitation, accident, alteration, misuse, abuse, neglect, negligence (other than
Manufacturer's), failure to install, maintain, assemble, or mount the InSinkErator Product in accordance with
Manufacturer's instructions or local electrical and plumbing codes.
• Wear and tear expected to occur during the normal course of use, including without limitation, cosmetic rust, scratches,
dents or comparable and reasonably expected losses or damages.
• Losses or damages caused by the Dornbracht Water Dispenser
In addition to the above exclusions, this warranty does not apply to InSinkErator Products installed in a commercial or
industrial application.
No Other Express Warranty Applies
This warranty is the sole and exclusive warranty provided to the Customer identified above. No other express warranty, written
or verbal, applies. No employee, agent, dealer, or other person is authorized to alter this limited warranty or make any other
warranty on behalf of Manufacturer. The terms of this warranty shall not be modified by the Manufacturer, the original owner, or
their respective successors or assigns.
What we will do to Correct Problems
If your InSinkErator Product does not operate in accordance with the documentation provided to you, or you have questions
concerning your InSinkErator Product or how to determine when service is needed, please call the toll free InSinkErator
AnswerLine at 1 (800) 558-5700, or visit our website at www.insinkerator.com. You may also notify us at: InSinkErator Service
Center, 4700 21st Street, Racine, Wisconsin 53406 USA.
The following information must be provided as part of your warranty claim: your name, address, phone number, your
InSinkErator Product model and serial number, and if necessary, upon request, written confirmation of either: (a) the date shown
on your installation receipt, or (b) the date shown on your purchase receipt.
Manufacturer or its authorized service representative will determine, in its sole and absolute discretion, if your InSinkErator Product
is covered under this warranty. You will be given the contact information for your closest authorized InSinkErator Service Center.
Please contact your InSinkErator Service Center directly to receive in home warranty repair or replacement service. Only an
authorized InSinkErator service representative may provide warranty service. InSinkErator is not responsible for warranty claims
arising from work performed on your InSinkErator Product by anyone other than an authorized InSinkErator service representative.
If a covered claim is made during the Warranty Period, Manufacturer will, through its authorized service representative, either
repair or replace your InSinkErator Product. Cost of replacement parts or a new InSinkErator Product, and cost of labor for repair
or installation of the replacement InSinkErator Product are provided at no cost to you. Repair or replacement shall be determined
by Manufacturer or its authorized service representative in their sole discretion. All repair and replacement services will be provided
to you at your home. If Manufacturer determines that your InSinkErator Product must be replaced rather than repaired, the
warranty on the replacement InSinkErator Product will be limited to the unexpired term remaining in the original Warranty Period.
Limitation of Liability
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER OR ITS AUTHORIZED SERVICE
REPRESENTATIVES BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING
ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE
INSINKERATOR PRODUCT OR THE MANUFACTURER'S OR ITS AUTHORIZED SERVICE REPRESENTATIVE'S NEGLIGENCE.
MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT,
REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT,
NEGLIGENCE, STRICT LIABILITY, OTHER SORT OR OTHERWISE), SHALL MANUFACTURER'S LIABILITY TO YOU EXCEED THE
PRICE PAID BY THE ORIGINAL OWNER FOR THE INSINKERATOR PRODUCT.
The term "consequential damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of
use or revenue, cost of capital or loss or damage to property or equipment.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not
apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
InSinkErator may make improvements and/or changes in the specifications at any time, in its sole
®
discretion, without notice or obligation and further reserves the right to change or discontinue models.
7