Using The Multimedia Remote Control; Remote Control Keys - Sanyo DS24424 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Multimedia Remote Control

QuickTips
Be sure batteries
are installed
correctly.
Point the remote
control toward the
equipment you
want to operate.
Objects between the
remote control and
the equipment may
cause misoperation
of the remote
control function.
If the remote
control does not
work: Press TV key
(see item 1).
The remote
control must be
programmed before
it will operate your
VCR, DVD Player,
or Cable Box. See
pages 9~11.
Cannot select
channel with number
keys. Press " 0" in
front of numbers
1 ~ 9. Example: C 05.
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and Left flashing
arrow indicates
volume is
decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
8
Remote Control
Operates your TV, VCR, DVD, and Cable converter box. To program the remote control,
see pages 9 ~ 11.
Install Battieres as shown (2 AA, not included)
Notes:
Do not mix old batteries with new ones or mix
different types of batteries together.
Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak
and cause damage. (Normal battery life is roughly
six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly
in compliance with all applicable laws. For detailed information, contact your local County
Solid Waste Authority.

Remote Control Keys

Mode Keys—Use these keys to program the remote control and to select the operat-
ing mode (VCR, TV, or AUX).
To Operate Your...VCR—Press the VCR key. Cable Box or DVD Player—Press the
AUX key. Television—Press the TV key.
Note: Be sure to hold down the mode key while entering a code number,
see page 9.
Input Key—Press to select the program source: TV signal or signal from the DVD
Player or other equipment you have connected to the A /V jacks.
Number Keys—Two keys must be pressed to select a channel. Example: Press 0 then 6
to select channel 6. For cable channels 100 through 125, press and hold the 1 key until
C1– – appears. Then press the other two numbers.
Caption Key—See page 13.
Menu Key—Use this key with the
on-screen menu system (see pages 12 ~ 13).
Channel Scanning (CH
channels in memory and to adjust the volume.
Mute Key—Press once to minimize the volume. Press again to restore.
VCR / DVD Keys—These keys control VCR or DVD functions for Fast Forward
( ✉✌ Rewind (
), Play (
V-Guide Key—See pages 14 ~ 15.
▲/▼
and – /+ keys to navigate and adjust features of the
▲/▼
) and Volume (VOL – /+) Keys—Press to scan through the
4
), Record (REC
), Stop (
), and Pause (II).

Publicidad

Tabla de contenido
loading

Tabla de contenido