Using the Audio Output Jacks
QuickTips
Position your TV at
I
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Using the Multimedia Remote Control
Operates your TV, VCR, and DVD Player, or Cable converter box. To program the remote
control, see pages 10 ~ 12.
INSTALL BATTERIES AS SHOWN (2 AA, not included)
Notes:
–
Do not mix old batteries with new ones or mix different types of
batteries together.
–
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed
of properly in compliance with all applicable laws. For detailed information,
contact your local County Solid Waste Authority.
8
Connect Stereo Amplifier to Audio Out / Remote Control
CONNECTING AUDIO OUT JACKS TO A STEREO AMPLIFIER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
Connect the TV Audio Out (R/L) to the Stereo Amplifier In (R/L).
Press POWER to turn on the TV. Turn on external equipment also.
Note: DO NOT connect external speakers directly to the TV.
What you will need for connections:
Audio Cable – 1
Stereo Amplifier
Back of TV
VIDEO AUDIO INPUT
COMPONENT
AV2
AV1
S-VIDEO
UHF/VHF/CATV
VIDEO
Y
75Ω
AUDIO
OUTPUT
P
b
(MONO)
L
L
L
P
R
AUDIO
R
r
R