Onkyo A-9110 Manual De Instrucciones página 21

∫ Headphone output is intermittent or there's no
sound
0 The connection part may be dirty. Clean the headphones
plug. See your headphones' instruction manual for
cleaning information. Also, make sure that the
headphones cable is not broken or damaged.
The RI linking feature
∫ RI linking isn't working properly
0 Make sure that the RI REMOTE CONTROL jacks are
properly connected.
0 A connection to the RI REMOTE CONTROL jack is not
enough for the units to operate as a system. Connect the
Analog audio cable properly. (p11)
Remote Controller
0 Make sure that the batteries are installed with the correct
polarity.
0 Install new batteries. Do not mix different types of
batteries, or old and new batteries.
0 Make sure that the unit is not subjected to direct sunshine
or inverter-type fluorescent lights. Relocate if necessary.
0 If the unit is installed in a rack or cabinet with colored-
glass doors or if the doors are closed, the remote
controller may not work reliably.
Others
∫ Strange noises can be heard from the unit
0 If you have connected another unit to the same wall outlet
as this unit, this noise may be an effect from the other
unit. If the symptoms improve by unplugging the power
cord of the other unit, use different wall outlets for this unit
and the other unit.
Others
21
En