Skil 3335 Manual De Instrucciones página 12

with a properly grounded three-prong outlet.
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. The conductor with insulation having
an outer surface that is green with or without yellow stripes is the
equipmentconductor. If repair or replacement of the electric cord or
plug is necessary, do not connect the equipmentgrounding conductor
to a live terminal.
Check with a qualified electrician or service personnel if the ground-
ing instructions are not completely understood, or if in doubt as to
whether the tool is properly grounded.
Always use proper extension cord. The use of any extension cord will
cause some loss of power. To keep this to a minimum and to prevent
overheating and motor burnout, use the table below to determine the
minimum wire size extension cord. Use only 3-wire extension cords
which have 3-prong grounding type plugs and 3-pole receptacles
which accept the tool's plug. Make sure your extension cord is in
good condition.
Extension Cord Length
0-7 m
7-15 m
15-30 m
"Save these instructions"
12
2089_Manual_Skil_3335.indd 12 2089_Manual_Skil_3335.indd 12
Wire Size A.W.G.
2
1.0 mm
1.5 mm 2
1.5 mm 2
10.02.10 14:19:38 10.02.10 14:19:38