Makita DVC860L Manual De Instrucciones página 7

1 1
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity
indication
Battery indicator status
Blinking
On Off
Indicating the remaining battery
capacity
(Only for battery cartridges with "B" at the end of the
model number.)
► 1. Indicator lamps 2. CHECK button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for few seconds.
2 2
Remaining battery capacity
50% - 100%
20% - 50%
0% - 20%
Charge the battery
1
2
Indicator lamps
Lighted
NOTE:
• Depending on the conditions of use and the
ambient temperature, the indication may differ
slightly from the actual capacity.
Switch action
2
3
► 1. Stand-by switch 2. Power button 3. Suction force
adjusting knob
To start the cleaner:
1. Set the stand-by switch to the "I" side. The cleaner
gets into stand-by state.
2. Press the power button.
To make the cleaner get into stand-by mode, press the
power button again.
To turn off the cleaner, set the stand-by switch to the
"O" side.
The suction power can be adjusted according to your
work need.
Suction power can be increased by turning the suc-
tion force adjusting knob from the
the symbol.
NOTICE:
• Always set the stand-by switch to the "O" side
when not using the cleaner for long time. The
cleaner consumes power during stand-by state.
7 ENGLISH
Off Blinking
75% to 100%
50% to 75%
25% to 50%
Charge the
malfunctioned.
symbol to
Remaining
capacity
0% to 25%
battery.
The battery
may have
1