Wireless Multiple Flash Shooting - Canon MR-14EX II Manual De Instrucciones

Flash Control from the Camera's Menu Screen
Functions Which Cannot Be Set from the Flash Function
Settings Screen
Some of the following functions as in the tables below cannot be set
from the camera's flash function settings screen (p.38). In such a case,
set it by operating the MR-14EX II.
When Custom Function C.Fn-15-0 is set
E-TTL autoflash
Functions Which Cannot Be Set From Camera Operation on MR-14EX II
A:B flash ratio (control)

Wireless multiple flash shooting

• Transmission channel
• A:B flash ratio (control)
• Flash exposure compensation amount for
slave C
Manual flash
Functions Which Cannot Be Set From Camera Operation on MR-14EX II
Flash output for flash tube B when tubes
A and B are fired
Wireless multiple flash shooting
• Transmission channel
• Flash output for tube B
• Flash output for slave C
When Custom Function C.Fn-15-1 is set
All the functions such as wireless multiple flash shooting can be set
from the flash function settings screen.
Single-side firing (p.26) is not possible when C.Fn-15-1 is set, since C.Fn-
15-1 is a setting for wireless multiple flash shooting.
For Custom Function C.Fn-15 (Macro: Wireless control), see page 63.
42
Page 25
Pages 48-50
Page 33
Pages 48, 55-56