Replacing The Batteries - Monacor measurement DMT-2050 Manual De Instrucciones

6 Replacing the Batteries

GB
If the symbol
1.5 V button cells (6) must be re-
placed: With the shell of the housing
opened on the rear side of the meter,
remove the lower screw for the bat-
tery compartment cover and take off
the cover. Remove the exhausted
batteries. Insert two button cells of
the type LR-44 with their positive
poles outwards (fig. 2). Replace the
cover and screw it on again.
7 Specifications
General
Display: . . . . . . . . . . 9 mm LCD, 3
Power supply: . . . . . 2 x 1.5 V, LR-44
Ambient temperature: 0 – 40 °C
Dimensions: . . . . . . . 60 x 125 x 25 mm
Weight: . . . . . . . . . . . 112 g
DC voltage
Measuring ranges: . .: 340 mV, 3.4 V, 34 V,
Accuracy
Input resistance: . . . . ≥ 9.1 MΩ
22
340 mV: . . . . . . . . ±(2 % + 2 digits)
3.4 V: . . . . . . . . . . ±(1 % + 2 digits)
34 V – 600 V: . . . . ±(2 % + 2 digits)
is displayed, the two
340 V, 600 V
1
/ digits
2