CDVI GALEO 4.0 Manual De Instalación página 11

INSTALLATION MANUAL
GALEO 4.0 Bluetooth
Weatherproof Illuminated Keypad with remote electronics
4. Unlock time
configuration
TMGALEO (OPTIONAL)
IP64
IK10
Salt spray
Vibrations tests
-25°C to +70°C
2] NOTES & RECOMMENDATIONS
Cable :
The distance between the GALEO and the remote
electronic can not exceed more than 10 meters.
Make sure that the cable is not near by a high
voltage cables (ex: 230 V AC).
Recommended cable between the GALEO
and the remote electronic :
To expand the supplied 3 meter cable, select a 2
twisted pairs cable (4 wires), SYT1 0.8MM (AWG 20).
Recommended power supplies suitable
for the GALEO :
ADC335 (230V input) or BS60 (230V input).
5. Create
user sheet
REMOTE CONTROLLER (BOXCODE)
IP52
-25°C to +70°C
Consumption
(3 relay outputs activated and
keypad illuminated)
AC
DC
Mounting recommendations :
Mount the keypad on a flat surface to avoid any
vandalism and to insure the best mounting.
Security advice :
For security advice reasons, there is no master
code in the factory setting (only 5 terms).
The 1 2 3 4 5 code is forbidden as a master code.
When selecting a master code and user code avoid
sequencial codes (example : 3 4 5 6 7).
Back EMF protection :
To secure the system from back electromagnetic
fields do not forget to mount the varistor in parallel
on the lock.
6. Open the door
with the button
12 V 24 V
166 mA 82 mA
195 mA 105 mA
cdvigroup.com
EN
48 V
-
54 mA
11