Assembly Of Locking Rod - Garant heavy-duty rack Manual De Instrucciones

4.3.4 Assembly of locking rod

E
Insert locking rod (E) with pins facing upward into the cut-outs on the
X
rear crossmembers (top part with locking bolt)
The pins on the locking rod (E) must engage in the locking bolts on the top
crossmember.
N
Fasten each retaining plate (N) using 4 hex screws M8✕20 (M),
X
4 plain washers (Q) and 4 hex nuts M8 (R).
Locking rod must move freely.
M
Q
N
Q
R
www.hoffmann-group.com
DE
EN
FR
IT
ES
39