Assembly Of Pull-Out Shelf; Assembly Of Side Bars - Garant heavy-duty rack Manual De Instrucciones

4.5.

Assembly of pull-out shelf

Prior to starting assembly of the pull-out shelf, the rack must
be firmly anchored in the place it is installed (see section 5).

4.5.1 Assembly of side bars

Prior to starting assembly, it is imperative you read the section "Fastening
captive nuts"
(see section 4.2.2.).
J
G
Fasten 6 captive nuts (L) in the shaped cut-outs provided in the each of
X
the two frame elements.
Fasten each side bar (G) and (H) through the bottom holes using 2 hex
X
screws M8✕20 (M) and 2 plain washers (Q).
Detach the retaining plates (J) to the left/right. These must then be reat-
X
tached after mounting the pull-out shelf.
H
J
www.hoffmann-group.com
L
Q
M
DE
EN
FR
IT
ES
47