Connecting The Instrument; Location Requirements; Electrical Connections - Holex 98 1108_1 Manual Del Usuario

98 1108_1
ɽ Recirculation air filter system for hazardous substances
ɽ 1 mains connection cable
ɽ 1 plug for potential-free contact
ɽ 1 Operating Instructions
Should one of the above components be missing or damaged please inform
Hoffmann Group. Please keep the packaging for returning the instrument for
service or repairs.

Connecting the instrument

Please make sure that the mains supply provides the correct voltage.
Do not cover the ventilation openings on the two sides!
personal
Do not use any highly flammable substances!
injuries
Before servicing the instrument disconnect it from the mains supply!
Service work should only be carried out by authorised personnel!
damage
After unpacking allow the instrument to stand for some time for accli-
to the
matisation purposes before connecting it to the mains supply.
system
It is then ready for use.

Location requirements

Please make sure that the location of the instrument meets the following safety and
other ambient requirements:
Location inside a building.
personal
injuries
Ambient temperature between 5 and 50°C.
Relative humidity between 10 % and 95 %.
damage
Protect it against heat and excessive solar radiation.
to the
system
Make sure that the instrument cannot fall over.

Electrical connections

The standard version of the instrument is delivered for connection to a 230 VAC,
50 Hz mains supply.
www.hoffmann-group.com
17
DE
EN
FR
IT
ES