Troubleshooting - Ryobi P2805 Manual Del Operador

PROBLEM
Spray pattern is like a sprayer
rather than a fog.
Unit will not spray or sprays
improperly.
Tank pressure is not building.
Unit is "spitting" after trigger is
released.
Spray is weak.
Unit runs for a short period
then shuts off.
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

POSSIBLE CAUSE
Unit is tilted too far forward.
Unit is being shaken or moved
too fast.
Tank is overfilled.
O-ring in cap needs to be
replaced.
Liquid in tank is too thick.
Filter needs to be cleaned.
Solution is too thick.
Battery needs charging.
Solution is too thick.
or call (toll free) 1-800-860-4050.
11 — English
SOLUTION
Unit must be kept level during use.
Allow the unit to remain still until the liquid inside settles
and normal fogging resumes, then move slowly and do
not shake the unit during use.
Reduce the amount of liquid in the tank. The tank should
not be filled beyond the max fill line.
Call customer service to order a replacement o-ring,
then replace o-ring in cap.
Empty the tank, clean both the tank and filter, then try
again. Make sure that all chemicals/liquid used in the
fogger are as thin as water.
Clean filter as described in Cleaning the Unit.
Make sure that all chemicals/liquid used in the fogger
are as thin as water.
Recharge the battery.
Make sure that all chemicals/liquid used in the fogger
are as thin as water.