Features; Product Specifications; Assembly - Ryobi P531 Manual Del Operador

PRODUCT SPECIFICATIONS

No Load Speed .......................................................................................................................................27,000 r/min. (RPM)
Collet .............................................................................................................................................................................1/4 in.
Collet Adaptor ...............................................................................................................................................................1/8 in.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.

FEATURES

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
OPERATION
APPLICATIONS
You may use this product for the purposes listed below:
 Cutting electrical outlet openings in drywall or wood pan-
eling. It is recommended to use a 1/8 in. bit for cutting
wood paneling.
 Creating decorative wood accents
 Cutting tile
NOTE: Applications for this tool require different types of
bits. Be sure to use the right bit for your tool.
STARTING/STOPPING SPEED SAW
See Figure 1, page 8.
 Push the switch left or right as shown.
WARNING:
Battery tools are always in operating condition. Lock
the switch when not in use or carrying at your side,
when installing or removing the battery pack, and when
installing or removing bits.
INSTALLING/REMOVING BATTERY PACK
See Figure 2, page 8.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
5