FlexiForce RS200 Manual De Instalación, Utilización Y Mantenimiento página 19

manual
With key-way:
NB! See separate manual spring break device installation: 656Manual GB.pdf
TORSION SPRING TENSIONING
CAUTION!
Torsion springs are subject to considerable tension! Proceed at all times with extreme caution.
Installation, maintenance and repair should be carried out only by experienced and properly trained
overhead door fitters. Use correctly fitting and properly maintained tension levers (FlexiForce
code RES-TB).
Number of turns on the torsion springs:
Height (H) 4 panels
2000mm 7.1 turns
2125mm 7.6 turns
2250mm 8.0 turns
2375mm 8.4 turns
2500mm 8.5 turns
5 panels
2750mm 9,4 turns
3000mm 10,3 turns
st
Insert the 1 tension lever completely into the slot.
GB
rev.0 Feb-09
Max
23 Nm
5 panels
6.8 turns
7.3 turns
7.7 turns
8.7 turns
9.2 turns
6 panels
9,2 turns
10,0 turns
Turn the 1
that the spring is tensioned.
RS200 manual GB 2009
st
tension lever a quarter turn such
www.flexiforce.com
18