Finishing The Door - FlexiForce RS200 Manual De Instalación, Utilización Y Mantenimiento

manual GB
rev.0 Feb-09
nd st
Insert the 2 lever completely into the next slot. Take over the tension of the spring from the 1 tension
lever to the 2 nd tension lever. Remove the 1 st tension lever from the slot. Turn the 1 st tension lever a
quarter turn such the spring is tensioned. Repeat until number of turns is achieved. Then fix the spring
plug to the shaft. Check the door balance and adjust the springs if necessary (equally both springs!)
Max 25 Nm

FINISHING THE DOOR

RS200 manual GB 2009 www.flexiforce.com
19