Optional: E-Operation - FlexiForce RS200 Manual De Instalación, Utilización Y Mantenimiento

manual GB
rev.0 Feb-09

OPTIONAL: E-OPERATION

When you have selected an electrical operator drive (LIFTMASTER LM60K/R or other),
then this should be assembled in conformity with the handbook supplied with this operator
and above displayed instructions. You should clearly follow the instructions for electrical
operation in this handbook.
In order to maintain the closing peak force of the door within the CE-standards the
attachment point of the drawbar should be fixed at the proper position. Ask your supplier
for the correct position!
NB! The person installing the door must check thoroughly if the combination between this
door and the selected operator is safe to use (ITTR-approval report). Keep in mind the
max. peak force that is allowed when closing the door. People could get hurt if the
adjustment of the operator software, or the installation of the operator or the selected
operator on this door, are not checked correctly!!
RS200 manual GB 2009 www.flexiforce.com
23