Easy Way To Set The Time; Setting The Date - Amano PIX-200 Manual De Instrucciones

5. The display will return to the clock display. If you need to return to
the "set up program" display, press the (E) button again.
NOTE: When you are using the unit in the US, please check if the time
zone setting is correct. (Refer to page 20)
NOTE: When the Atomic Clock is built in and you are using the unit in Europe, please check if the
Atomic Clock setting is correct. (Refer to page 19)

Easy Way to Set the Time

If you do not need to adjust the seconds, this will be an easy way to set the time.
1. Unlock and remove the cover.
2. Press (+1 HOUR) to change the hour, and (+1 MIN.) to change the minute. The seconds will
not start from "00". It will continue to advance while you are setting the clock.

Setting the Date

1. Unlock and remove the cover.
Press (+) and (E) button at the same time for 2 seconds.
The "set up program" display will appear.
2. Press the (+) button to position the " " under TUE.
3. Press the (E) button to set the Month. While the Month display is
blinking adjust the month using (-) and (+) button.
Press the (E) button to confirm the month.
4. While the Date display is blinking, adjust the date using (-) and (+)
button. Press the (E) button to confirm the date.
5. While the Year display is blinking, adjust the year using (-) and (+)
button. Press the (E) button to confirm the year.
6. You will return to the "set up program" display.
(If the Date Displayed is Incorrect)
AM
:
:
:
:
:
:
:
:
7