Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the pictograms
•
If the pictograms on the housing have become worn, you can
remove replace them with new pictograms. Observe the preferred
direction.
Dismantling the support ring
•
Use a screwdriver to lever the support ring from the fastening lug
on the side of the oxygen self-rescuer.
•
Remove the support ring (if necessary, with the impact protection)
from the bottom cover of the housing.
Mounting the support ring
•
Slide the support ring (if necessary, with impact protection) onto
the bottom cover of the housing, until the support ring hooks onto
the latch. Ensure that it fits properly.
Disassembling the impact protection
•
Dismantle the support ring
•
To separate the impact protection from the support ring, individu-
ally pull the impact protection's fastening holes from the hooks on
the support ring.
Mounting the impact protection
•
To fasten the impact protection to the support ring, pull the faste-
ning holes in the impact protection onto the hooks on the support
ring.
•
Mount the support ring.
Transport
Transport the training device in the original packaging.
Storage
Store the training device in a cool, dry location in the original packag-
ing. Storage temperature see "Technical data".
Disposal
Dispose of the training device in accordance with the applicable local
waste disposal regulations.
Technical data
Ambient temperature
in storage
during use
Relative humidity
Inhalation/Exhalation Resistance
at 35 l/min sinus-shaped volume flow rate
Weight
Dräger Oxy 3000 T
(with impact protection)
Dräger Oxy 3000 T
(without impact protection)
Dräger Oxy 6000 T
(with impact protection)
Dräger Oxy 6000 T
(without impact protection)
Dimensions (W x H x D)
Dräger Oxy 3000 T
Dräger Oxy 6000 T
12
Order list
Designation and description
Training device Dräger Oxy 3000 T
Training device Dräger Oxy 3000 HT
Training device Dräger Oxy 6000 T
Training device Dräger Oxy 6000 HT
Shoulder belt
Hip belt
For Dräger Oxy 3000 T/HT:
Impact protection
Support ring for carrying on shoulder
Support ring for carrying on hip
Support ring for carrying on shoulder
with connection for impact protection
Support ring for carrying on hip
with connection for impact protection
For Dräger Oxy 6000 T/HT:
Impact protection
Support ring for carrying on shoulder
Support ring for carrying on hip
Support ring for carrying on shoulder
with connection for impact protection
Support ring for carrying on hip
with connection for impact protection
Cleaning agent
Sekusept Cleaner
Incidur
Spare parts can be found in the spare parts list 1167.495.
o
o
-20
C ... +80
C
o
o
-5
C ... +80
C
up to 100 %
±4.0 mbar
2.5 kg
2.3 kg
3.4 kg
3.1 kg
212 x 181 x 100 mm
245 x 210 x 117 mm
Order number
63 07 300
63 07 400
63 07 100
63 07 200
63 05 135
on request
63 05 004
63 05 182
63 05 189
63 05 062
63 05 009
63 06 004
63 06 182
63 06 189
63 06 062
63 06 009
79 04 071
79 04 072
Publicidad
Tabla de contenido
