1650023-A
Insert lever A into the hole of bracket B from above and fix
it with screw C from below.
4.7 Resetting the service light
(CBJ Care control unit only)
CAUTION!
If the service light is flashing yellow during daily
usage or after a reassembly, the lift requires
service.
– Contact your Invacare provider for service.
After the initial assembly of the lift, the service light is
flashing yellow and needs to be reset before using the lift.
To perform an initial reset of the service light:
1. Locate the hand control.
2. Press and hold the UP button and the DOWN button at
the same time for five seconds.
3. You will hear a sound when the service light has been
reset.
Setup
11