Battery Charger; Environmental Protection - Stiga BL 24 Li Manual De Instrucciones

Maintenance
• Never use the machine
with worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
The noise and vibration levels
shown in these instructions
are the maximum levels for
use of the machine. Suitable
preventive measures must be
adopted to eliminate possible
harm caused by high noise
levels and vibration-induced
stresses; utilise the machine
at constant speed, firmly hold
the handgrip with adequate
strength, utilise the machine
at the minimum speed
required to perform the work,
wear ear-protection devices,
make frequent and adequate
pauses during the work.
Storage
• To reduce fire risks, do
not leave containers with
debris inside a room.
2.5 BATTERY / BATTERY
CHARGER
IMPORTANT The following
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
• Only use battery chargers
recommended by the
manufacturer to recharge
batteries. An inadequate
battery charger may cause
electric shock, overheating
or corrosive liquid to
leak from the battery
• Use only batteries specifically
designed for your power tool.
The use of other batteries may
cause injuries and fire risks.
• Make sure that the machine
is switched off before inserting
the battery. Inserting a
battery in a machine which is
switched on can cause a fire.
• Keep all unused batteries at
a distance from paper clips,
coins, keys, nails, screws
or other small metal objects
as contact with the same
can cause short circuits.
Short circuits between
battery contacts can lead
to explosion or fires.
• Never use the battery
charger in environments in
the presence of vapours,
flammable substances or on
easily flammable surfaces
such as paper, fabric,
etc. The battery charger
heats up during recharging
and may cause a fire.
• When transporting batteries,
make sure the contacts never
come into contact with each
other and never use metal
containers to transport them.
2.6 ENVIRONMENTAL
PROTECTION
Safeguarding the environment
must be a relevant and priority
aspect of machine use, of
benefit to the community and
the environment we live in.
• Avoid being a disturbance to
the neighbourhood. Use this
machine at reasonable times of
the day only (not early morning
or late evening when the noise
could cause disturbance).
• Scrupulously comply with local
regulations for the disposal
EN - 5