Adjust The Door Lock; Adjust The Insulating Cord; Adjust The Door Hinge - Rohde KE L Serie Manual De Instrucciones

Enjoy your results

7.2. Adjust the door lock

Frontloaders KE 55 L and KE 70 L series
The door lock can be adjusted in order to guarantee the best possible sealing of the
kiln door�
Loosen the first counter nut and turn the Allen screw half to full turn� Now counter the
screw� Check that the door fits closely and evenly against the kiln (figure 18)�
Frontloaders KE-L (100 – 250), KE-N and KE-S series
Loosen the first counter nut and turn the Allen screw half to full turn� Now counter the
screw� Proceed in the same manner with the second door lock� Check that the door
fits closely and evenly against the kiln (figure 19)�
7.3. Adjust the insulating cord – Frontloaders KE-L (100 - 250), KE-N and KE-S
series
We recommend that the insulating cord of the kiln door is adjusted every 5 to 6 months�
This provides an even sealing and insulation of the kiln door� Take a clean piece of wood,
place it on the outer edge of the door frame and carefully pull it towards the insulating
cord�
7.4. Adjust the door hinge – Frontloaders KE-L (100 - 250), KE-N and KE-S series
If necessary you can also adjust the door hinge� Make sure that both door hinges are
closed� Loosen the Allen screw of the door hinge and turn it half, max� full turn� Press
the kiln door flat against the kiln body and tighten the screw (figure 21)�
28
Page of 80
figure 18
figure 19
figure 20
figure 21
Status: 01 / 2016