Further Functions - NUK Baby Thermometer 2 in 1 Manual De Instrucciones

Briefly press the SCAN button and gently move the probe
4
head in a circular motion over the skin on the temple.
As you are doing this, you will hear a sound that indicates
the temperature is being read.
A second beep sounds to indicate that the temperature
5
has been taken.
The hourglass symbol
seconds.
The time required to take the temperature ranges from
Note
5 to a maximum of 8 seconds. This depends on how
long the device needs to determine the correct
temperature of the temples.
6
The temperature taken is shown on the LCD display.
7
The device automatically switches to room temperature
mode after approx. one minute.
2.3.3

FURTHER FUNCTIONS

Room
temperature
stops flashing after approx. 4
After switching mode, the room temperature will be
shown on the LCD display. The temperature symbol
appears.
- 38 -
Figure 8