Extension Tubes; Filling The Boiler Tank During Use - Reliable BRIO 250CC Manual De Instrucciones

FLOOR BRUSH (7)
This accessory is used on extension tubes (8) and it has handy cloth grips that
can hold, as well as the cloth provided (12), any type of machine washable cloth. To
fit the cloth, place the brush in the middle, lift the clips at the ends of the brush,
insert a flap of cloth and then release the clips
adapter (14) is attached first to the floor brush (7).

ExTENSION TUBES (8)

The extension tubes snap together and can be easily separated by pressing the
release button. They are useful for reaching high surfaces with the window wiper
(6), using the special extension joint, or they can be used with the floor brush
(7) .
11
ACCESSORY BAG (9)
The appliance comes with a bag for the attachments, which is handy for storage
as well as for keeping them close at hand

FILLING THE BOILER TANK DURING USE

If the boiler tank (L) should become empty during use, switch off the appliance
and proceed as follows:
• Press the button (A) to discharge any remaining steam;
• Unplug from main power;
• Slowly unscrew the boiler tank filler cap (M), waiting a few seconds for the
steam to finish before unscrewing it completely. Wait a few minutes before
adding water to the boiler tank (L);
• Add more water, making sure to pour it in slowly to prevent new bursts of
steam from forming. We recommend waiting at least 3 minutes from the time
of unplugging the appliance before adding more water to the boiler tank;
• Firmly screw the boiler tank filler cap (M) back into place;
• Plug the appliance to the power mains;
• Press the on switch (I).
12
. Ensure that the floor brush
10
.
12