CMT ORANGE TOOLS CMT7E Instrucciones De Uso Y Seguridad página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

TOOL USE & CARE:
• Use clamps or other practical way to secure and support the workpiece to a stable platform.
Holding the work by hand or against your body is unstable and may lead to loss of control.
• Do not force the router. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
• Do not use the router if switch does not turn it on or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired. If there appears to be a problem refer to the "Trouble-
shooting" and if necessary contact a repair centre.
• Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the router. Such preventative safety measures reduce the risk of starting the
tool accidentally.
• Store the router in a dry location, out of the reach of children and other untrained persons. This
tool is dangerous in the hands of untrained users.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp
cutting edges are less likely to bind and are easier to control.
• Check for misalignment (ie. excessive vibration), binding of moving parts, or any damage that may
affect the routers operation. If damaged have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
• Do not exceed the cutter manufacturers' rpm specifications.
• Never start the router while the cutter is touching the workpiece.
• Ensure the cutter has completely stopped before plunging to the collet lock position.
• Do not handle cutters immediately after use - they become very hot.
• Ensure the removable plunge spring is always fitted when using hand-held.
• Only use cutters and accessories specified as suitable for this router.
• Use only shank cutters with collet adaptor supplied.
SERVICE:
• Any damage to the router should be repaired and carefully inspected before use, by qualified repair
personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
• Servicing should only be carried out by authorised CMT Repair Centres using original CMT
replacement parts. Follow instructions carefully and refer to "Trouble-shooting" for problem
identification and advice. Use of unauthorised or faulty parts may create a risk of electric shock or
injury.
SPECIFIC SAFETY RULES AND/OR SYMBOLS:
Hold the router by insulated gripping surfaces when performing an operation where the cutting tools
may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of
the tool "live" and shock the operator.
www.cmtutensili.com
EN
5

Publicidad

Tabla de contenido
loading

Tabla de contenido